Round-the-Clock Emergency Fire Damage Cleanup in Texas, TX
The fire is out, the trucks have left, and now you are standing in the driveway wondering what happens next. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of Texas, TX. We answer around the clock, and dispatch starts while you are still on the phone.
- A free referral line that answers 24/7, holidays included
- Independent local crews serving every corner of Texas, TX
- Written, line-item estimates before any work begins
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across Texas, TX
Unify Fire Solutions is not a restoration company. We are the dispatch desk that gets the right independent contractor moving toward your property.
Most people only deal with fire damage once in their lives, so nobody knows the order of operations. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers field these questions every day, from every part of Texas, TX, and we can usually point you in the right direction in a few minutes.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Those answers decide which independent crew in our network is the best match and how urgent the first visit is.
The contractors we connect you with are licensed and insured independent businesses based in or near your community. They own their equipment, employ their own crews, write their own estimates and answer for their own work. Our job is the connection: getting a qualified local pro on the phone with you at 2 a.m. instead of leaving you to scroll through search results on a cracked phone screen.
The line is free to call, and it stays open 24/7, weekends and holidays included. Whether the property is a single-family home, a rented duplex, a condo unit or a storefront, the routing process is the same anywhere in Texas, TX.
It helps to have a few details ready: the property address, your insurer's name, a claim number if you have one, and the fire department's incident number. If you don't have any of that yet, that's fine. Plenty of people call from a neighbor's porch with nothing but a phone, and the dispatcher will help you figure out what to gather next.
What independent Fire Damage Cleanup crews in Texas, TX do
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Here is how the independent contractors in our network approach each one.
Emergency response and mitigation
Mitigation means stopping the damage from getting worse, and in fire work the clock is unforgiving. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Next comes water: truck-mounted or portable extraction units pull standing water out of carpet and subfloors, and wet pad is usually cut out and bagged.
Once the structure is stable, crews set up air scrubbers with HEPA filtration to capture airborne soot, and they may place the work area under negative air pressure so particles don't drift into clean rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Boarding of windows, doors and openings in walls
- Tarps on the roof to keep weather off open framing
- Water extraction and tear-out of soaked materials
- HEPA air filtration and moisture mapping
Single-family homes and condo units
A house fire rarely stays in one room, even when the flames did. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew starts by mapping how far the residue traveled, room by room, before anything gets wiped.
Dry soot from a fast, hot fire is powdery and comes off with dry chemical sponges and HEPA vacuums. Wet, smeary smoke from a slow, smoldering fire is oily and needs alkaline cleaners and a lot more labor. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Every residue needs its own chemistry, and the wrong product can push the stain further into paint and wood.
Burned materials come out until the crew reaches sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. It is fair to ask the crew which studs will stay and which will go, and to have that written into the estimate.
- Soot mapping and surface testing before cleaning
- Targeted tear-out of burned drywall, insulation and trim
- Framing cleaned by blasting, then sealed
Commercial property, rentals and apartment buildings
When the property is a business or a rental, the questions multiply. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex needs smoke contained before it migrates through shared attic space and ductwork.
Commercial-focused contractors tend to work in phases so part of the building can stay open. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. In a retail shop, the sales floor might reopen while the back room is still sealed off.
Inventory is its own problem. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased work plans that keep part of the space open
- Containment walls between damaged and occupied units
- Inventory disposal lists for the claim file
Apartment and condo buildings bring building code into play. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask the crew if those items are part of their estimate or will go to a separate trade.
For landlords and property managers: request a brief written status for each unit, livable or not, that you can forward to tenants and your carrier that day.
Contents cleaning, odor control, ductwork and water
Ask any fire survivor and they mention the smell. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents specialists pack out salvageable belongings, inventory them box by box, and clean them off site using ultrasonic tanks for hard goods and specialty laundering or dry cleaning for textiles. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Odor control happens after cleaning, never instead of it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone treatment is effective but requires an empty building, no people, pets or plants, so ask before it is used.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. It is reasonable to ask whether the contractor works to IICRC guidance, including S700 for fire and smoke damage and S500 for water damage.
- Contents pack-out with an itemized inventory
- Thermal fogging, hydroxyl or ozone deodorization
- Inspection and cleaning of ducts, coil and air handler
The water from the hoses is what most people underestimate. A single engine can pour hundreds of gallons into a house in minutes, and that water finds its way into wall cavities, under cabinets and down through ceilings. Mixed with soot and ash, it is dirty water, so wet carpet, pad and insulation are usually removed rather than dried in place. Crews pull baseboards or drill small vent holes to dry wall cavities, and they log moisture readings until the framing is back to a normal dry level.
- Drying of wall cavities soaked by hose water
- Electronics cleaned by a specialty vendor
Standing in front of a burned house right now?
Call the free line and a dispatcher will walk you through the next hour and start finding an independent crew near you.
Call +1-833-336-1630What a referral through Unify Fire Solutions looks like
Nobody can promise the cost of a fire job or the length of a rebuild. These are the things we can say plainly.
Line-item estimates in writing
The independent contractor provides a written, line-item estimate before work starts, and you should always ask for one. Many crews in Texas, TX build estimates in the same software adjusters use, so the two documents can be compared side by side.
Dispatch at any hour
Someone answers 24/7, and dispatch begins as soon as you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Local crews across the state
The network reaches cities, suburbs and rural communities throughout Texas, TX. The crew you get is local to your area and knows how the nearby building department and utilities operate.
Licensed and insured pros
We refer callers only to licensed and insured independent contractors. Even so, check the license and request a certificate of insurance before you sign, and ask if the crew works to IICRC S700 guidance.
A second option if you need one
If the first contractor turns out not to be the right fit, call us again and we'll connect you with someone else. It might be scheduling, a second estimate your adjuster asked for, or just a bad fit in personality. Any of those is a fine reason.
On bigger fire losses, a second estimate is normal, and plenty of adjusters prefer it. Make sure both estimates cover the same scope, line for line, so the comparison is fair.
A step-by-step guide after a fire
Every fire is different, but the order of decisions is surprisingly consistent anywhere in Texas, TX. Use this as a checklist while you wait for a crew.
- 1
Safety first, then the call
Stay out until the fire department tells you it's safe to return. Then call +1-833-336-1630, answer a few questions about the scene, the water and any openings, and a dispatcher will start finding a crew.
- 2
Arrival and site security
The contractor walks the property with you, documents it in photos, and boards or tarps openings. If water is standing, extraction often starts on the first visit.
- 3
Written scope and estimate
You receive a written estimate, line by line, with mitigation split out from rebuild work. You or the contractor share it with your adjuster, and nothing beyond emergency stabilization should start until you sign.
- 4
Cleaning, drying and deodorizing
The crew tears out burned materials, dries the building, cleans soot from each surface, and deals with the odor. Moisture readings and photos are logged daily so the adjuster can see the progress.
- 5
Rebuild and final walkthrough
Permitted repair work comes next: framing, electrical, drywall, paint and floors. Before paying the final bill, walk through with the contractor and write down anything still unfinished.
The first hour, before any crew arrives: make sure every person and pet is out and accounted for. Wait for the fire department to release the scene before going back in, and leave the breaker panel alone. Write down the incident number the firefighters give you; your insurer will ask for it. If it's safe from outside, shoot wide photos and video of every side of the building.
Fire department release and red-tagged properties
Until the fire department formally hands the property back, it's their scene. When investigators are still determining the cause, you could be kept out for several hours or, now and then, a few days.
After the release, a building official from your city or county may post a placard. Green usually means occupancy is allowed, yellow means restricted entry, and red means no one enters until an engineer or official evaluates it. Placard systems vary by jurisdiction across Texas, TX, so read the notice carefully and call the number printed on it.
A red tag doesn't stop mitigation from the outside. Crews can still board, tarp and fence, and many work with a structural engineer to get the red tag lifted.
Utility shutoffs after a fire
Firefighters often cut power at the meter and close the gas valve during the fight. After a fire shutoff, the utility typically won't turn service back on until an inspection, and in some cases a licensed electrician or plumber has to sign off first.
For that reason, restoration crews usually arrive with generators to power the scrubbers and dehumidifiers. Contact your power, gas and water companies directly, report the fire, and ask what they require before restoring service.
If water service is still live and a line ruptured in the heat, close the main shutoff. It is usually near the meter or where the line enters the house.
Working with your insurance adjuster
Call your insurance company the same day and get a claim number. Nearly every policy expects you to prevent additional damage, and that is the purpose of emergency mitigation. You don't have to wait for the adjuster to approve boarding, tarping or drying, though you should keep every receipt.
Independent contractors across Texas, TX usually produce two separate invoices: one for mitigation (board-up, extraction, drying, soot cleanup) and one for restoration (rebuilding). Adjusters handle the two differently, so separating them keeps the claim moving. Ask the crew for time-stamped photos, daily drying logs and a contents list, and get a copy of whatever goes to the insurer.
When the home can't be lived in, many policies cover additional living expenses, also called loss of use, for things like a hotel and meals. Limits vary from policy to policy, so ask your agent what applies and keep all receipts.
Permits and local building departments
Cleanup and mitigation work typically doesn't require a permit. Structural repair, electrical rewiring, new framing, roof replacement and HVAC replacement almost always do. Permits in Texas, TX are issued by local city or county building departments, so the forms, fees and inspection schedules vary from one place to the next.
A local contractor who knows the nearby office will usually pull the permit under their own license. Confirm the permit is posted and inspections are passed before anyone closes the walls. The insurer may want the final inspection sign-off before it releases the last check.
Opening the walls of an older home can bring up new issues. When the house is old enough to have asbestos in ceiling texture, flooring or duct wrap, or lead paint, testing may be needed before tear-out. Repairs may also have to meet the current code rather than the code the house was built under, which some policies cover as ordinance or law coverage, so ask your agent.
Landlord and tenant responsibilities
In a rental, the building and the tenant's belongings are usually insured separately. Usually the owner's policy covers the building and fixtures, and the renter's policy covers the tenant's furniture, clothes and temporary housing.
Owners should put access, timelines and habitability decisions in writing for tenants. Renters should take their own photos before pack-out and request a copy of the contents list. Rules for both sides come from Texas, TX law and the lease, so review the lease and contact a local housing office or attorney with questions.
Either party can call the line. We usually suggest the property owner authorize the structural work and the tenant handle their own contents claim, with the same crew doing both if everyone agrees.
Getting a small business back open
For a business, every closed day costs money, so speed of mitigation matters even more. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Restaurants, salons, medical offices and food retailers will likely need a health or fire inspection before reopening. Have the contractor write a phased schedule that shows what has to be done ahead of each inspection.
Back up the point-of-sale system, payroll records and customer files before anyone moves the computers. If you lease the space, notify the landlord right away, since the lease normally says who pays for which repairs.
Why 24 to 72 hours is the window: soot continues to etch finishes, wet building materials begin to grow mold, and smoke odor sinks further into porous surfaces every day. Getting mitigation going early is often the biggest factor in how much can be cleaned instead of thrown out.
Notes from people who called the line
Shared with permission, with last names shortened.
Our dryer vent caught fire late at night, and when the firefighters finally cleared us I couldn't think at all. The dispatcher asked me five or six simple questions and told me to get the incident number before the engine left. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I own two rental duplexes and one tenant had a kitchen fire. The best part was that the contractor split the mitigation bill from the rebuild estimate. The adjuster signed off on the first invoice in a week, and the neighboring tenant stayed put because the crew sealed off the shared wall and attic.
We were renters, and the fire began in the apartment under ours. I didn't know my renter's policy would pay for a hotel until the dispatcher suggested I ask my agent. The crew packed out our clothes and the kids' things and gave me a typed inventory, which made the claim a lot easier.
My restaurant went dark on a Friday after a grease fire. The crew put up containment so the dining room could be cleaned and inspected while they kept going in the kitchen. They gave me a written list of what had to be done before the health inspection, and we passed the first time.
The first company I was sent couldn't start for almost a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No pushback and no runaround, which was exactly what I needed.
Common questions from callers in Texas, TX
How fast can a Fire Damage Cleanup technician arrive in Texas, TX?
Dispatch starts the moment you call, and the phone is answered 24/7. How soon a crew arrives depends on which independent contractors are available and how far they are from your property. In most of Texas, TX it is often the same day, and the dispatcher will tell you what to expect before you hang up.
Do you provide upfront pricing?
We don't set prices, since Unify Fire Solutions is a referral line and not the contractor. The independent crew writes a line-item estimate before work begins, and you should have it in hand before you sign. Emergency board-up or water extraction may begin right away to prevent more damage, but ask the crew to explain those charges in writing too.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. A lot of them also handle contents pack-out and storage, duct cleaning, and the rebuild after mitigation. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in TX work directly with my insurance company?
Most independent crews in TX deal with adjusters every week. They document the damage with photos, moisture readings and a line-item estimate, and they can send that file to your adjuster with your permission. The policy is still your contract with your insurer, so you have the final say and should keep a copy of every document.
Do I need a permit for fire damage repairs in Texas, TX?
Cleanup and drying generally don't need one, while structural, electrical, roof and HVAC work nearly always does. Your city or county building department issues permits in Texas, TX, and the rules differ from place to place. A local contractor will usually pull the permit and schedule inspections for you.
Can I stay in my house after a fire?
It depends on the fire department's release, any building placard, and whether utilities can be safely turned back on. Even with a small fire, smoke residue and odor can make sleeping in the home unhealthy, especially for kids, older adults and anyone with asthma. Ask your insurer whether your policy includes additional living expenses for temporary housing.
Should I call my insurance company or a contractor first?
Do both the same day, in whichever order you can. Nearly every policy expects you to stop additional damage, so boarding and water removal shouldn't wait on the adjuster. Write down the claim number, save all receipts, and pass the number to the contractor so their documents line up.
What should I throw away after a fire?
Discard any food, medication or cosmetics exposed to heat, smoke or hose water. Photograph and list everything else before discarding it, and let the crew help sort what can be saved. Many items that look ruined, like clothes, dishes and hard furniture, can often be cleaned.
Is it safe to clean up soot myself?
Scrubbing soot with a damp cloth tends to grind it into paint and fabric, and the residue can carry acids and fine particles that are bad to inhale. If you must go in for essentials, wear gloves and an N95 mask, and keep fans and the HVAC off. Leave the cleaning to the crew, who will test the residue and choose the right chemistry.
Does Unify Fire Solutions serve every part of Texas, TX?
Our network reaches cities, suburbs and rural communities throughout Texas, TX. Out in remote areas the closest crew may have a longer drive, and the dispatcher will tell you that up front. Call +1-833-336-1630 with the property address and we'll let you know who can reach it.
Statewide Fire Damage Cleanup coverage in Texas, TX
A single number connects you with independent crews anywhere in Texas, TX, from crowded metro blocks to farmhouses on long rural roads.
In metro areas, there are usually several contractors within reach, so the dispatcher can match on specialty, like commercial kitchens or high-rise condos. In suburbs, crews tend to handle a lot of attached garage fires, dryer vent fires and kitchen fires in single-family homes. In rural parts of Texas, TX, the nearest crew may travel farther, and they often arrive with generators and trailers because utility restoration can take longer.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Common causes we hear about include kitchen fires, dryer vents, space heaters, electrical faults, candles, lightning strikes, grills, garage fires, furnace puff-backs and fire spreading from a neighbor's property. Whatever the cause, the first call is the same.
You can call even if you live elsewhere and the fire is at a rental you own or a relative's house. The dispatcher can coordinate with a neighbor, a tenant or a property manager on site, and the contractor can send photos and the written estimate to you by email before anything beyond emergency stabilization begins.
